Category Archives: All

I have 300-400 pounds of used x-ray film, out of jackets, as well as one silver collection bucket from the fixer used to process the x-rays. Could you please give me an estimate of the value of the film and collected silver? Thanks. – From Joseph in Cedar Rapids, Iowa

Hi Joseph,

We can recover the silver from x-ray film and from your silver collection bucket. For the film, we could also help you coordinate freight or transportation.

I think you are talking about a small filter that is called an MRC or CRC that is used to exchange silver from iron from fixer solutions. Depending on the silver concentration from the collection bucket we could return 60%-70% of the silver’s value.

It’s great that you are recycling these items instead of throwing them out. It’s a great way to add a little more money in your pocket, as well as having the peace of mind that the silver will be recycled and reused in such industries as medical, jewelry or auto. Thanks so much Joseph!

I have silver tableware with the following markings: .925 fine silver | 5 troy ounces | id # 060061 | silver town. What do these mean? And what is the value of my items? – From Sue in Newark, New Jersey

Hi Sue,

It is better to have too many markings on your silverware than no markings! Your markings can give us a good indication of the value of your silver. I’ll try and break it down.

.925 fine silver means that your items are 92.5% silver.

5 troy ounces is the weight. Troy ounces are different than your standard ounce that you can find on a postal scale. Average ounces or standard ounces are called avoirdupois ounces.

The formula to change standard ounces to troy ounces is as follows:
Standard Ounce Weight x .912 = Troy Ounce Weight

For example:
16 standards ounces x .912 = 14.59 troy ounces

ID # is the number given to the items by the manufacturer. I am assuming that silver town is the manufacturer, although I cannot find a record of the company. This information might be important if you were trying to sell these items for their retail or collection value instead of their melt value.

We can offer 75% of your tableware’s fine silver content by weight. However, keep in mind that many times the knife blades are stainless steel as silver is too soft to create a reasonable cutting device, obviously this decreases their melt value as steel is not a precious metal. On heavy items like tableware and silverware, we recommend using the US Post Office’s flat rate, priority mail boxes because you can fit a lot of material without worrying about the weight. For more information about refining silverware, visit our website. Hope this information helps!

I have some old goldware with a Hindu or Indian God on the tip and markings on the handle of the spoons, forks and cake knife. Do you know how to tell the age? There are no markings and the only thing I found is a broken clasp with the words Cheney England stamped on it. From Vin in Las Angeles, California

Hi Vin,

You may want to take your items to an antique store or dealer for an appraisal or some sort of assessment if they are really old or not. If you want to sell them for their precious metal melt value then we can help.

We recommend doing the magnet test on your items. Run a strong magnet over your tableware, if the magnet sticks then your items are most likely plated and have no melt value. If your items are not magnetic then you can send them to our refinery and we can test them and determine their gold or silver concentration and call you. Sometimes sterling silver is plated to make look like gold but it is the sterling silver that has value. However, keep in mind that if the material under the plating is stainless steel or something other than sterling silver, we will not be able to buy your items.

We will buy them for their melt value only. If you do send them to us please note on your packing slip that you need a phone call after the items are tested.

I have removed the platinum from catalytic converters. What is the value by weight? – From Rob in Pleasant Hill, Oregon

Hi Rob,

We do buy the pellets and honey combs from catalytic converter units that have been “de-canned.” It sounds like your materials are already “de-canned.” Some other information from you would help us give a more accurate estimate for your material such as how many pounds do you have? Do you have loose pellets or honeycomb? Are the catalytic converters from non-diesel engines or diesel engines?

For shipments less than 100 lbs., we go by this payment schedule:

Non-Diesel Engines

For loose pellets from non-diesel engines we pay $3.00 per pound.
For honeycomb material from non-diesel engines we pay $8.00 per pound.

Diesel Engines

For loose pellets from diesel engines we pay $3.00 per pound.
For honeycomb material from diesel engines we pay $3.00 per pound.

If you have greater than 100 lbs. of “de-canned” catalytic converter material, please contact us for a custom estimate. Hope this information helps!

I have 45 rolls of US War Nickels, which is 1,800 coins. What are these worth? From Nathan in Birmingham, Alabama

Hi Nathan,

Because of the significant amount of copper in War Nickels, the refining process takes quite a bit longer and requires more energy. This makes extraction more expensive and time consuming because the precious metal material has to go through extra treatments for longer periods of time.

We pay 40% of War Nickels’ silver by weight. This percentage is lower than some other coins that do not contain so much copper. Old quarters, dimes and half dollars usually contain more silver and less copper, allowing us to return a higher percentage on these items. Examples of junk silver coins include:

• Mercury Dime (1916-1945)
• Roosevelt Dime (1946-1964)
• Washington Quarter (1932-1964)
• Liberty Half Dollar (1916-1947)
• Franklin Half Dollar (1948-1963)
• Kennedy Half Dollar (1964)
• Kennedy Half Dollar (1965-1970)
• Morgan Dollar (1878-1921)
• Peace Dollar (1921-1935)
• Eisenhower Dollar (1971-1976)

For more information about junk silver coins, visit our website.