Category Archives: Gold

I have some old goldware with a Hindu or Indian God on the tip and markings on the handle of the spoons, forks and cake knife. Do you know how to tell the age? There are no markings and the only thing I found is a broken clasp with the words Cheney England stamped on it. From Vin in Las Angeles, California

Hi Vin,

You may want to take your items to an antique store or dealer for an appraisal or some sort of assessment if they are really old or not. If you want to sell them for their precious metal melt value then we can help.

We recommend doing the magnet test on your items. Run a strong magnet over your tableware, if the magnet sticks then your items are most likely plated and have no melt value. If your items are not magnetic then you can send them to our refinery and we can test them and determine their gold or silver concentration and call you. Sometimes sterling silver is plated to make look like gold but it is the sterling silver that has value. However, keep in mind that if the material under the plating is stainless steel or something other than sterling silver, we will not be able to buy your items.

We will buy them for their melt value only. If you do send them to us please note on your packing slip that you need a phone call after the items are tested.

I’m just a humble jewelry designer from NY who is trying to get used to all this stuff! From Natalie in New York, Arkansas

Hi Natalie,

Don’t worry if you don’t pickup on everything right away. It takes sometime to get to know the precious metal industry. Here are some helpful tips that I’ve put together for you and other jewelry designers out there that may have some scrap precious metal to refine.

It’s great that you are learning and researching about this now so you have all the tools at hand. We work with jewelry designers, jewelry sellers and gold party representatives from all over, let us know if you have any questions about precious metal!

Keep in mind that precious metals include: gold, silver, platinum, palladium and rhodium.

Pay attention to where you scrap is going.

From small gold chain links to shavings of silver, try to account for it all. For larger pieces of gold, silver or platinum that you cannot use in creating or fixing jewelry its best to keep them as separated as you can. We recommend working on smooth, dark surfaces so you can see scrap easier.

Don’t throw anything out, it could be precious!

Even your facility that you resize, shape and design jewelry in can contain valuable precious metal scrap. Areas where precious metal can be accumulating include sink traps, floor mats, carpets, rags, floor sweeps and vacuum bags. Think about this when you’re cleaning your facilities. If you regularly clip, size and shape precious metal chances are small pieces of it have gotten away from you. As precious metal refiners we can extract even the smallest amounts of precious metal from these items.

Keep your stones and gems.

As precious metal refiners, we only return payments for metal materials, not stones and gems. To reclaim the value on these items, make sure you remove them before sending them to any metal refinery.

I have a large quantity (about 40+ lbs.) of sterling and 925 silver jewelry. And I have over 1000 dwts of clean scrap gold (no stones). Also let me know if there are any other hidden charges.  From Betty

Hi Betty,

We pay 75% for sterling silver and between 80-90% and sometimes more for large quantities of gold. For those of you that are unfamiliar with “dwts,” this is a unit of measurement used in the industry that is an abbreviation for pennyweight. You might also see “pwt” or “PW” used. Pennyweight is a unit of mass which is the same as 24 grains, 1/240th of a troy pound, 1/20th of a troy ounce, approximately 0.055 ounces or approximately 1.555 grams. We have a previous blog post about other precious metal terms.

It sounds like you may have encountered some other dealers or refineries with hidden charges. With Arch Enterprises all you pay for is shipping. For consumers items like jewelry, we will review your material and mail payment to you in 3 business days or less after the material is received. There are no hidden charges!

I have an 18k gold plated wall sconce light fixture. It retailed for $2300 new. Since it was so expensive, I’m wondering if it has more than just the typical thin layer of gold plating and if so, would it be possible to salvage the gold? – From David

Hi David,

Without seeing or testing the light fixture I cannot say for certain if the gold on your light fixture is more than a plating. However, usually the retailer and/or manufacturer will let the buyer know if an item contains a significant amount of gold because it would be a major selling point for them.

Also, it can be easy to get hung up on the retail price of an item, but it is very different from the melt value of the item. Even though the retail price is high does not mean that price translates to the precious metal value, which is the only value that refiners take into consideration.

If the piece is not damaged, I would guess that the retail value of it would be worth more than the precious metal value. Arch Enterprises would not be able to offer you a return for the gold plated item because there would not be enough gold to extract. I would check to see if your wall sconce is a brand name and even if you could sell pieces of it separately. Hope this helps!

I watch gold fever on the outdoor channel on Saturday morning. If I had the supplies, I think I would try panning myself. I asked the pawn shop if I could bring it there if I found any gold. She said they could test it but didn’t say if she would buy it. Do I deal with a pawn shop or you guys with raw ore like that? Giving 1 oz as an example, and todays prices, how much does testing cost and the net cost after testing? — Sue

Hi Sue!

You can send us samples of the raw ore and we can analyze them for $75-$150 depending on the size of the rock you send us. If we end up refining it we will not charge you the fee for testing. We can return to you a large percentage of gold value after refining but the exact amount will depend on the quality and volume you find.

Be careful when dealing with pawn shops and selling raw gold to them. Because they will most likely sell the gold to a refiner like Arch Enterprises themselves, it’s in your best interest to sell directly to a refiner without middleman pawnshops. Hope this helps, good luck panning.

Thanks!